Product ID:EXPRESS IMPRESSION MATERIAL 7302H,CATALYST
MSDS Date:04/19/1989
FSC:6520
NIIN:01-217-4339
Kit Part:Y
MSDS Number: BJQJV

MINNESOTA MINING & MFG CO HEALTH CARE PRODUCTS DIV

3M CTR BLDG 225-5S-01
ST PAUL, MN 55144-1000
US

Info Phone: 612-733-1110

Cage: 28156

MINNESOTA MINING AND MFG CO HEALTH CARE SERVICES DIV

ST PAUL, MN 55144-1000 US

Telephone: 800-854-0631

Cage: 28156

VINYL POLYSILOXANE CATALYST

CAS: 68083-19-2

Fraction By Weight: 40-50%

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 50-60%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

CATALYST HYDROPHILIC AGENT

Fraction By Weight: <1%

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT WITH UNCURED MATERIAL MAY
CAUSE MINOR IRRITATION. IN GENERAL, UNUSUAL HEALTH HAZARDS ARE NOT
EXPECTED WITH THIS PRODUCT. THE PRODUCT DOES CONTAIN CYRSTALLINE
SILICON DIOXIDE WHICH CAN CA USE SILICOSIS; BUT IN THE FORM WITH
THIS MATERIAL, EXPOSURE IS UNLIKELY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES/SKIN: FLUSH WITH WATER.

Extinguishing Media:USE WATER FOG, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WIPE UP SPILLS WITH ABSORBENT MATERIAL AND
PLACE IN METAL CONTAINER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:AVOID EYE CONTACT.

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:NONE SPECIFIED BY MANUFACTURER.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
THIS IS PART A (CATALYST PART) OF A TWO-PART (A & B) SET WHICH IN TURN
IS PART OF A FOUR SET KIT UNDER THIS NSN. THIS PART IS EXPRESS
VINYL POLYSILOXANE HYDROPHYILIC IMPRESSION MATERIAL, LIGHT BODY -
REGULAR SET #7302H (3M ID # 70-2005-2434-9) - CATALYST PART.

HCC:N1
Spec Gravity:1.5
Viscosity:60000-80000
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE AND GREEN VISCOUS LIQUID, NO ODOR

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:SMALL QUANTITIES - DISPOSE AS NORMAL WASTE.
LARGE AMOUNTS - MIX CATALYST AND BASE PASE PARTS AND ALLOW TO CURE
PRIOR TO LANDFILL DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.